Silver/silver chloride (Ag/AgCl) cup electrodes for EEG and PSG
Reusable silver/silver chloride (Ag/AgCl) cup electrodes with highly flexible cable for EEG and PSG
The CNSAC silver/silver chloride (Ag/AgCl) cup electrode with a 150 cm cable is a reusable cup electrode for precise signal recording in EEG and polysomnography (PSG).
The silver-plated and chlorinated sensor ensures stable derivation with low skin-electrode impedance. The highly flexible, biocompatible TPU cable with Kevlar core ensures high tensile strength, durability, and low-noise signal behavior—especially for video EEG and monitoring applications with a larger range of motion.
The touch-protected 1.5 mm DIN plug (DIN 42802) enables a secure and standard-compliant connection to common EEG and PSG systems.
Technical specifications:
- Electrode type: Ag/AgCl cup electrode (reusable)
- Cup diameter: 10 mm Ø
- Cup height: 2.8 mm
- Cable length: 150 cm
- Cable insulation: Biocompatible TPU
- Core fiber: Kevlar
- Plug: 1.5 mm DIN (DIN 42802)
- Connector material: Medical grade PVC
- Color: Gray
- Low-noise cable design
- Packaging unit: 10 pieces (color-coded)
Recommended use:
To reduce skin impedance, the skin should be prepared with an abrasive skin preparation gel. The electrode is then filled with a suitable EEG adhesive paste and fixed to the prepared skin area.
Particularly suitable for long-term EEG, video EEG monitoring, and sleep diagnostics when longer cable lengths are required.
Technical data sheet for "CNSAC silver/silver chloride cup electrodes"
Preparation of the skin and application of the silver-silver chloride (Ag/AgCl) cup electrodes
For a reliable measurement, first treat the patient's skin with an abrasive skin preparation gel such as Nuprep (article no.: CR-001) or OneStep® AbrasivPlus (article no.: CR-005). This process reduces the electrical resistance of the skin and thus ensures good signal quality.
Next, fill the Ag/AgCl cup electrode with an adhesive conductive paste such as lic2® electrode cream, 10 tubes x 100g or Ten20 (item no.: CR-008) and press the electrode firmly onto the prepared area. For better adhesion, a small amount of lic2® can be applied to a compress and placed over the electrode. If the electrode is placed on the face or forehead, it can also be fixed in place using Fixomull® stretch (article no.: DI-048).
Compatibility with various devices:
The electrodes are mechanically and electrically very sophisticated and are compatible with various devices, e.g:
- Compumedics
- Embla
- Somnomedics
- Natus
- Cadwell
- Bio-logic
- Compumedics
- Embla
- Grass
- Xltek
- Lifelines
- Nicolet
- NicoletONE
- Nihon Kohden
- Respironics
- Teca Nervus