FFP3 Respiratory Protection Mask
Valved Particle Filtering FFP3 Mask
FFP3 Mask with TÜV Report FFP3-Mask-Document
Model: OM-P3299BA, EN149:2001+A1:2009
EN 149:2001+A1:2009 approved
Adjustable nose clip
Provides a good seal around the face
Ultrasonically welded headbands
Nonwoven fabric and Melt-blown fabric
Headbands – Terylene, spandex
Nose Clip – Aluminum
Parts of the respirator which come into contact the wearer have no sharp edges or burrs.
This respirator contains no components made from natural rubber latex.
PFE (Particle Filtration Efficiency/paraffin oil)≥99%
Breathing resistance: inhalation(95L/min)≤300Pa, exhalation(160L/min)≤300Pa
Non-powered air-purifying particle respirator to protect against particles from the ambient
air, except for atmospheres containing less than 19.5% oxygen, underwater operation, escape
purpose and firefighting respirator.
Intended provisionally for wearing in middle or high risk areas during the COV-19
(Always follow User Instructions and use only in the indicated manner).
DO NOT use for gases or vapours (i.e. anesthetic gases such as isoflurane or vapours from sterilants such as glutaraldehyde).
DO NOT use for asbestos, arsenic, cadmium, lead, 4,4′-methylenedianiline (MDA), or abrasive blasting.
DO NOT use in any manner not indicated in the User Instructions.
Approvals and Standards
Meets EN 149:2001+A1:2009 standard requirements for a minimum 99% filtration.
Shelf Life and Storage
3 years from the date of manufacture.
Store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme
temperatures, excessive moisture, and damaging chemicals.
Store respirators against mechanical damage.
Store in temperatures between -4°F(-20°C) and +86°F(+30°C) and not exceeding 80% RH.